Jerks, slipping or late gear changes often come from worn or low gearbox oil, software that needs updating or a control part, before being a serious fault. Have it diagnosed quickly by a garage used to automatic gearboxes: driving a long time with a symptom can turn a small job into a major repair.
Symptoms not to ignore
- Jerks when changing gear, especially when cold or at low speed.
- Slipping: the engine revs up without the car accelerating.
- Late gear changes or a gearbox stuck in one gear (limp mode).
- A delay between selecting D or R and the car moving off.
- A noise (whine, clunk) or a burning smell.
- A warning light for the gearbox or an alert message on the dashboard.
The most common causes
- Worn oil or low level: the oil also controls the gear changes; as it ages, the changes become harsh. Heat and traffic jams wear it faster.
- Oil leak at a seal or the casing.
- Software or sensor: an update or a replaced sensor can cure jerks.
- Internal control parts: to be diagnosed by a specialist.
- A weak battery: on some cars, it causes strange messages and gearbox behaviour.
Automatic, automated, continuously variable: what changes
Several technologies go by the name « automatic gearbox ». Knowing which one your car has helps you choose the garage and understand the diagnosis:
- Conventional automatic (torque converter): smooth gear changes; sensitive to the condition and level of its oil.
- Dual-clutch automated gearbox: very fast; jerks at low speed may come from the clutches or their control.
- Single-clutch automated gearbox: a conventional clutch operated by a motor or actuator; jerks are more common.
- Continuously variable transmission (CVT), common on hybrids: no fixed gears, a specific oil and servicing to follow closely.
The gearbox type is in the manual and often on the registration document or purchase invoice. Give it to the garage on your first call.
Servicing an automatic gearbox
The service booklet says whether a gearbox oil change is planned and at what mileage. Some gearboxes are sold as « maintenance-free », but in severe conditions (heat, traffic jams, towing, mountains), many specialists still advise an oil check.
- Follow the service booklet, and ask a specialist what they advise for your driving conditions.
- Use the exact oil specified by the manufacturer: the wrong oil can damage the gearbox.
- Have the oil changed by an equipped garage: on many gearboxes, the level is checked at a precise temperature, with a diagnostic tool.
- React quickly to the first symptom rather than waiting for the next service.
Which garage to choose
An automatic gearbox needs a garage used to these gearboxes, the diagnostic tool for your make and the right oil. Before leaving the car, ask:
- Do you often work on this type of gearbox, on my make?
- Do you have the tool to read the gearbox fault codes and do the adaptations after the work?
- Which oil do you use, and how do you check the level?
- Can you give me a written quote explaining the fault found?
Be wary of a « gearbox needs replacing » verdict without reading the fault codes or a test drive: get a second opinion. See our guides on garages and quotes.
What not to do
- Keep driving for a long time with jerks or slipping.
- Add oil at random or any additive.
- Have the car towed with the driven wheels on the ground without checking what the manufacturer allows: many automatic gearboxes are damaged this way.
In doubt? A NUVIO expert advises you for free
Describe the symptom on WhatsApp, with a short video and your car model. A NUVIO expert tells you what is likely, whether you can drive, and points you to an audited partner garage used to automatic gearboxes: free car advice on WhatsApp.
